PoE and Network Equipment
Power Supply Equipment
PoE and Network Equipment
> 4+2 Unmanaged PoE Switch (4 PoE + 2 Uplink) SA-PS42M
4+2 Unmanaged PoE Switch (4 PoE+ with 2 Uplink ports)
4+2 Unmanaged PoE Switch (4 PoE + 2 Uplink) SA-PS42M
Put me on the Waiting List
Add to Cart
Write a Review
Email a friend
In the Box:
6 ports PoE Switch SA-PS42M, power adapter and user guide.
Use & Conditions
SA-PS42M is 4 ports 100Mbps PoE+ switch with 2 x 10/100M uplink ports RJ45, auto-detection and identification IEEE802.3af/at standard PD devices, then provide network signal and power over ethernet to any PoE and PoE+ devices, like, IP cameras, Access Points and VoIP phones and others. PoE Switch SA-PS42M is the perfect choice for the mini-type commercial network, it economically uses PoE deployment and can be best option for small office, house or any other place where don't need connect more than 4 PoE devices. If you found later on you need actually more ports to connect devices to the power and network, then don't worry, all our PoE switches has possibility to be connected to each other consistently.
Our 4+2 PoE Switch has 4 working modes, AI VLAN mode, AI CCTV video monitoring mode, AI power mode, AI QOS mode. All ports are free to communicate by default; In AI VLAN mode, 1-4 ports are isolated from each other, which can effectively restrain network storms and improve network performance. In AI Extend mode, the effective transmission distance of 1-4 ports can reach 250 meters, which is suitable for remote monitoring and power supply. In the AI power supply mode, the switch automatically detects the working status of the PD device and finds that the device abnormal automatically restarts the device. In AI QOS mode: the video data will be processed preferentially when the device is congested to make the video smoother.
PoE Ports: 4 - 10/100Mbps PoE+ RJ45 ports (port 1~port 4) with max. output power of the single port 30W;
Uplink Ports: 2 - 10/100Mbps Non-POE RJ45 ports (port 5 and 6);
Transfer Rate: 100Mbps full Duplex, 10 or 100Mbps Half Duplex;
Network interface: 10BASE-T or 100BASE-TX Ethernet RJ-45 port;
Bandwidth: 1.2Gbps (no block);
Network delay (100 to 100M bps): maximum 20 µs (using 64 byte packet);
Frames filter and transfer rate: 10M port maximum 14,800pps 100M port maximum 148,800pps;
Network protocol and standard:
IEEE 802.3i 10BASE-T;
IEEE 802.3u 100BASE-TX;
IEEE 802.3x Flow Control;
IEEE 802.3af/at Power over Ethernet;
POE pin: 1/2(+),3/6(-);
Power(Green Led on Power Adapter);
LINK/ACT(Green Led on the top right from the Port);
PoE(Yellow Led on the top left from the Port);
Total output power: 60W (All PoE port, port 1~port 4) single port max 30W;
Input power: 60W
DC output power;
US standard power plug;
Size (LxWxH): 125mm x 75mm x 27mm;
Operating Temperature:0°~40°C (32°~104°F);
Storage Temperature: -10C~60C;
Working Humidity: 10%~90% (Non-condensing);
Storage Humidity: 5%~90% (Non-condensing);
EMC: CE Class B; FCC Part 15, Class B;
VCCI Class B; C-Tick;
Warranty: 1 year.
Download User Manual ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
quality product. 5 stars.
Did you find this helpful?
AI Extend: 1-4 port supports 250M meters long distance power supply (recommended cat 5 or above);
AI VLAN: Isolating ports 1-4 from each other, restrain network storms effectively and improve network performance;
AI QOS: Customize application prioritization and increase network sensitivity. For example, video priority, monitoring transmission more smoothly;
AI power supply: Automatic detection power of port, power off and restart the device if find dead machine;
Supports IEEE 802.3af/at standard, automatically detects and identifies devices that comply with the IEEE 802.3af/at standard and supply power to it;
Support Auto MDI/MDIX;
Adopt store-and-forward exchange method;
Intelligent power supply, the lowest power consumption, ensure PD power needs;
With power circuit protection, protect the safety of PD;
No configuration characteristics of the power supply is automatically supplied to the adaptive equipment;
Fanless design, energy saving and environmental protection; no noise, reduce the impact on the environment;
Compact size design;
Support port without link power saving function;
All ports have wire-speed forwarding capability;
Plug and play, easy to use;
In order to safety, please non-professionals don’t open the casing of product;
Please be careful the risk of strong current and security protection when products carry power;
Please select the right power adapter provide power for PoE switch, before using please confirm if is it accord with the requirement of PoE switch;
Please don’t use PoE switch under the humid environment, avoiding water go into the product inside caused PoE switch breakdown.
Please start the power after the circuit connected;
Please don’t plug-in and plug-out the connection cable when product is carrying on power;
Please don’t use PoE switch under somewhere with more dust and EME;
Please don’t put heavy thing on PoE switch, in order to having an accident.;
According to the IEEE802.3AF/AT standard, Please use the Cat.5 or above, transmission distance 250 m;
Please don’t exceed the maximum output power of PoE switch when it connect more than one PD device;
Suggestion that PoE switch use for indoor, if you want to use for outdoor, Please install waterproof box.
Abnormal and Process
LED on the Power Supply Adapter
If light off, pls check if the external power supply plug powered normal and the power adapter connect correctly.
If power plug give to the Power Adapter proper
Voltage and power cords provide power to Adapter.
LED Indicator on Switch ports panel,
locate on left from the port
If light off, pls check if the corresponding RJ45 access network device and the network cable connect correctly, if the network cable is accord with Cat.5e / Cat6
standard (transmission distance max. 100 or 250 meter, if extend mode ON), if the network cable and network device is damaged.
PD Device Connection Indication on
the right side from the port
If light off, pls check, if the corresponding RJ45 access network device and POE powered normal and do not damaged.
If the network cable connect correctly and do not damaged or have proper quality to work on high distances.
8+1 Unmanaged 90W PoE Switch 8 port PoE with 1 Uplink port - PoE Switch SA-PS81M
Out of Stock.
140W 8 port Gigabit Ethernet PoE+ Switch SA-PS8G-120W
Out of Stock.
250W 16 PoE ports Unmanaged Gigabit PoE Switch with + 2 SFP - SA-PS16G
4+2 Unmanaged Full Gigabit PoE Switch (4 Gigabit PoE+ with 2 Gigabit Uplink ports) SA-PS42G
Browse Similar Items
PoE and Network Equipment
Unmanaged PoE Switches