Power Supply Equipment
> 90W Fast Ethernet 8 PoE+ with 1 Uplink port - PoE Switch SA-PS81M
96W Ethernet PoE+ Switch SA-PS81m with 8 PoE ports RJ45 10/100Mbps and 1 Ethernet port RJ45 for Data.
90W Fast Ethernet 8 PoE+ with 1 Uplink port - PoE Switch SA-PS81M
Put me on the Waiting List
Add to Cart
Write a Review
Email a friend
In the Box:
PoE Switch SA-PS81M, power adapter, mount kit and user guide.
Use & Conditions
SA-PS81M is 8 port 100Mbps PoE+ switch with 1 Ethernet uplink ports RJ45, auto detection and identification IEEE802.3af/at standard PD devices, then provide network signal and power over ethernet to any PoE and PoE+ devices, like, IP cameras, Access Points and VoIP phones and others. PoE Switch SA-PS81M is perfect choice for mini-type commercial network, it economically use PoE deployment and can be mounted on the wall or some other place incide your office or house.
8 - 10/100Mbps PoE+ RJ45 port (port 1～port 8) and 1 - 10/100Mbps Non-POE RJ45 port (port 9);
100Mbps full Duplex, 10 or 100Mbps Half Duplex;
10BASE-T or 100BASE-TX Ethernet RJ-45 port;
Bandwidth: 1.8Gbps (no block);
Network delay (100 to 100M bps): maximum 20 μs (using 64 byte packet);
MAC address capacity: 1K;
Frames filter and transfer rate: 10M port maximum 14,800pps 100M port maximum 148,800pps;
Network protocol and standard:
IEEE 802.3i 10BASE-T;
IEEE 802.3u 100BASE-TX;
IEEE 802.3x Flow Control;
IEEE 802.3af/at Power over Ethernet;
Total output power：90W (All PoE port，port 1～port 8) single port max 30W;
Input power：96W 52V@1.85A DC output power;
US standart power plug;
Size (LxWxH): 184mm x 94mm x 27mm;
Operating Temperature：0°~50°C (32°~113°F);
Storage Temperature：-40℃~70℃ (-4°~194°F);
Working Humidity: 10%~90% (Non-condensing);
Storage Temperature: 5%~90% (Non-condensing);
CE Class B; FCC Part 15, Class B; VCCI Class B; C-Tick;
PoE Switch SA-PS81M PDF-Flyer with Diagram.
Beautiful thing and working good, I recommend!
Did you find this helpful?
Excellent work with many different VoIP phones, we are buying it all the time.
Did you find this helpful?
Support power over ethernet cable device for example wireless AP and IP camera;
Support IEEE802.3af/at standard;
Data and power transmission distance up to 100m, it can be flexible installation for wireless AP and surveillance project;
Support upward port auto MDI/MDIX;
Adopted storage forward switch system;
Intelligentize power and minimum consumption，guarantee PD requirement;
With power supply circuit protection function and protection back-end device safety;
Automatically provide the adaptive device;
Fanless design realize saving energe and environment protection;
No noise design can reduce the affect for environment;
Compact size design;
Support IEEE802.1 Q VLAN and 4K VLANs;
Support loop circuit detection;
Support saving power function when port unconnected;
In order to safety, please non-professionals don’t open the casing of product; If you didn't apply for
written authorization from Smart Access your warranty for product will be immediately expired.
Please be careful the risk of strong current and security protection when products carry
Please select the right power adapter provide power for PoE switch, before using please
confirm if is it accord with the requirement of PoE switch;
Please don’t use PoE switch under the humid environment, avoiding water go into the
product inside caused PoE switch breakdown;
Please start the power after the circuit connected;
Please don’t plug-in and plug-out the connection cable when product is carrying on power;
Please don’t use PoE switch under somewhere with more dust and EME;
According to the IEEE802.3AF/AT standard, pls use the Cat.5e or above, transmission
distance reach to 100m;
Please pay attention to don’t exceed the maximum output power of PoE switch when it
connect more than one PD device;
Suggestion that PoE switch use for indoor, if you want to use for outdoor, please
install waterproof box;
Please don’t put heavy thing on PoE switch , in order to having an accident.
Please be sure you complying all this and suggestion and Smart Access warranty requirements, otherwise Smart Access not responsible for replace of fix our equipment under warranty and not responsible for all what can happen at the probable accident.
Abnormal and Process
Green Light ON
If red light off, pls check if the external power supply plug powered normal and the power adapter connect correctly.
Yelow Light ON
If red light off, pls check if the corresponding RJ45 access network device and the network cable connect correctly, if the network cable is accord with Cat.5e standard (transmission distance max. 100meter), if the network cable and network device is damaged.
PD Device Connection Indication
Green Light ON
If light off，pls check if the corresponding RJ45 access network device and POE powered normal, if the network cable connect correctly and network device is damaged.
PoE Extender SA-EX1
30W Gigabit PoE Injector SA-PI30W
250W 24 PoE+ Fast Ethernet + 2 Uplink Gigabit RJ45 and 2 SFP ports PoE Switch SA-PS24
Browse Similar Items
8 PoE ports Switches