Power Supply Equipment
> 24+4 ProVersion Unmanaged 250W 24 port PoE Switch + 2 Uplink Gigabit RJ45 and 2 SFP ports SA-PS24
24 ports PoE+ Switch SA-PS24 with 2 Gigabit RJ45 ports and 2 Gigabit SFP ports.
24+4 ProVersion Unmanaged 250W 24 port PoE Switch + 2 Uplink Gigabit RJ45 and 2 SFP ports SA-PS24
Put me on the Waiting List
Add to Cart
Write a Review
Email a friend
In the Box:
Build-in power 24 ports PoE+ Switch SA-PS24, mount kit and power cord cable.
Use & Conditions
Unmanaged PoE+ Switch SA-PS24 has 24 - 10/100M PoE+ ports with 2 Gigabit Up-link RJ45 and 2 Gigabit SFP ports. Auto detection and identification IEEE802.3af/at standard PD device and powering it by Ethernet cable. You can easily connect to our PoE Switch any PoE or Non-PoE equipment. SA-PS24 is the best choice for the commercial network because it economically uses PoE deployment of wireless AP and IP camera. SA-PS24 can resolve the problem of maintenance tedious, wireless coverage, terminal device powered, surveillance project.
24 ports 10/100M PoE+ RJ45 port (Adaptive MDI/MDIX ),
2 ports - 10/100/1000M Non-POE RJ45port(Adaptive MDI/MDIX) and 2 Gigabit SFP ports.
Bandwidth: 8.8Gbps (no block);
Store and forward mode: network delay (100 to 100M bps): maximum 20 μs (using 64 byte packet);
Address database size: 4K MAC;
Buffer memory: 2.75Mb;
Network protocol and standard:
IEEE 802.3i 10BASE-T;
IEEE 802.3u 100BASE-TX;
IEEE 802.3ab 1000BASE-T;
IEEE 802.3z 1000BASE-X;
IEEE 802.3x Flow Control;
IEEE 802.3af/at Power over Ethernet;
Total power: 250W, single port max 30W;
Input power: 100 - 240VAC/48VDC，8.3A，50/60 Hz;
US standard power plug;
Size (LxWxH): 440mm x 270mm x 44mm;
Weight: 5.0 kg;
Operating Temperature: 0°~50°C (32°~113°F);
Storage Temperature: -40℃~70℃ (-4°~194°F);
Operating Humidity: Maximum 90% (Non-condensing);
Storage Humidity: Maximum 95% (Non-condensing);
Operating Altitude: Maximum 10,000 feet (3,000 meters);
Storage Altitude: Maximum 10,000 feet (3,000 meters);
MTBF: 300,000 Hours;
CE Class B; FCC Part 15, Class B; VCCI Class B; C-Tick;
CE mark, ROHS, FCCUL, 60950(Listed)/EN60950;
Great poe switch for the price!
Did you find this helpful?
from king city.
Support power over ethernet cable device for example wireless AP and IP camera.
Support IEEE802.3af/at standard.
Data and power transmission distance 100m, it can be flexible installation for wireless AP.
and surveillance project.
Support upward port auto MDI/MDIX.
Adopted storage forward switch system.
Intelligent size power and minimum consumption, guarantee PD requirement.
With power supply circuit protection function and protection back-end device safety.
Automatically provide the adaptive device.
Adopt double fan cooling design to guarantee the equipment stability.
Support the flow control, 802 x full duplex mode.
Support saving power function when port unconnected.
Support maximum 1536 Bytes.
Support control broadcast packets.
In order to safety, please non-professionals don’t open the casing of product; If you didn't apply for
written authorization from Smart Access your warranty for product will be immediately expired.
Please be careful the risk of strong current and security protection when products carry
Please select the right power adapter provide power for PoE switch, before using please
confirm if is it accord with the requirement of PoE switch;
Please don’t use PoE switch under the humid environment, avoiding water go into the
product inside caused PoE switch breakdown;
Please start the power after the circuit connected;
Please don’t plug-in and plug-out the connection cable when product is carrying on power;
Please don’t use PoE switch under somewhere with more dust and EME;
According to the IEEE802.3AF/AT standard, pls use the Cat.5e or above, transmission
distance reach to 100m;
Please pay attention to don’t exceed the maximum output power of PoE switch when it
connect more than one PD device;
Suggestion that PoE switch use for indoor, if you want to use for outdoor, please
install waterproof box;
Please don’t put heavy thing on PoE switch , in order to having an accident.
Please be sure you complying all this and suggestion and Smart Access warranty requirements, otherwise Smart Access not responsible for replace of fix our equipment under warranty and not responsible for all what can happen at the probable accident.
Abnormal and Process
Red Light ON
If red light off, please check whether the external power supply plug powered normal and whether the power adapter connect correctly.
Red Light ON
If red light off, please check whether the corresponding RJ45 access network device and the network cable connect correctly, whether the network cable is accord with Cat.5 standard (transmission distance max. 100meter), whether the network cable and network device is damaged.
PD Device Connection
Yellow Light ON
If light off, please check whether the corresponding RJ45 access network device and PoE powered normal, whether the network cable connect correctly and whether network device is damaged.
Network Status Indicator
Green Light ON
If the light condition does not accord with the network status, please check whether the corresponding RJ45 access network device and PoE powered normal, whether the network cable connect correctly and whether network device is damaged.
4+1 ProVersion Unmanaged 60W PoE Switch 4 ports with 1 Uplink Fast Ethernet SA-PS41M
90W 8 port Gigabit Ethernet PoE+ Switch SA-PS8G-96W
24+2 ProVersion Unmanaged 400W 24 port PoE Gigabit Switch with 2 SFP ports SA-PS24G
Browse Similar Items
24 PoE ports Switches